Excell PWZ0163100.02 Troubleshooting Guide download pdf (Page 65)

E106534

9 - ENG

OPERATING INSTRUCTIONS (CONT.)

• SAVE ALL INSTRUCTIONS

PRESSURE WASHER OPERATING FEATURES PRESSURE

ADJUSTMENTS

The pressure setting is present at the factory to achieve optimum pressure and cleaning. If you need a lower pressure,

it can be accomplished by these methods.

1. Back away from the surface to be cleaned. The further away you are, the less the pressure will be on the surface to

be cleaned.

2. Change to the 40° nozzle – this nozzle delivers a less powerful stream of water and a wider spray pattern.

CAUTION

DO NOT attempt to increase pump pressure. A higher pressure setting than the factory set pressure

may damage pump.

TO USE SPRAY WAND

The nozzles for the spray wand are stored on the top stor-

age panel. See chart to choose the correct nozzle for the

job to be performed.

CHANGING NOZZLES ON SPRAY WAND

DANGER

RISK OF FLUID INJECTION. Do NOT

direct discharge stream toward persons, unprotected skin,

eyes or any pets or animals. Serious injury will occur.

WARNING

RISK OF FLUID INJECTION. Do NOT

attempt to change nozzles while pressure washer is run-

ning. Turn engine off before changing nozzles.

1. Pull back the quick connect collar on the spray wand

and hold it in place.

Insert the desired quick connect nozzle and hold in place.

3. Slide the quick connect collar forward until it locks into

place.

4. Check that the quick connect nozzle is securely locked

into the spray wand.

0° 15° 25° 40° Soap

Spray

Pattern

Uses

Powerful

pinpoint for

very intensive

cleaning

Intense clean-

ing of small

areas

Intense clean-

ing of medium

areas

Intense clean-

ing of larger

areas

Applies clean-

ing solutions

Surfaces*

Metal or con-

crete

DO NOT use

on wood

Metal, con-

crete, or wood

Metal, con-

crete, or wood

Metal, con-

crete, or wood

Metal, con-

crete, or vinyl

CAUTION

The high pressure spray from your pressure washer is capable of causing

damage to surfaces such as wood, glass, automotive paint, auto striping and trim, and delicate

objects such as owers and shrubs. Before spraying, check the item to be cleaned to assure

yourself that it is strong enough to resist damage from the force of the spray.

FIG. 7

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 112 113

Comments to this Manuals

No comments

Excell PWZ0163100.02 Troubleshooting Guide Page 65

Comments to this Manuals

Related products and manuals for High-pressure cleaners Excell PWZ0163100.02