Excell PWZ0163100.02 Troubleshooting Guide download pdf (Page 63)

E106534

7 - ENG

ASSEMBLY INSTRUCTIONS (CONT.)

• SAVE ALL INSTRUCTIONS

4. Locate axle and slide axle through holes in frame.

Secure one wheel to each end of axle with supplied M8

nuts. Ensure that small plastic washer is placed

between frame and wheel. Tighten nuts with provided

wrench.

5. Remove M6 bolts from upper handle and attach panel

to upper handle with M6 bolts. Tighten with Allen

wrench provided.

6. Remove screws from lower frame assembly and

attach wand holder to frame assembly with these

supplied screws.

7. Roll unit off of carton and discard carton.

8. Connect high-pressure hose to pump inlet and tighten

securely. (Fig. 4)

9. Connect wand to gun and tighten securely. (Fig. 5)

10. Attach high-pressure hose to gun. Tighten securely.

(Fig. 6)

FIG. 5

FIG. 6

FIG. 4

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 112 113

No comments

Excell PWZ0163100.02 Troubleshooting Guide Page 63